Steel Industrial Doors

Built for Working Sites Galvanised steel stands up to daily use in warehouses, factories and loading bays.

The Right Motor for the Job GfA inboard motors sit inside the barrel; outboard motors drive larger, heavier doors.

Single or Three Phase 230V suits standard doors; 415V suits larger, heavier or high-cycle doors.

Air and Light Options Perforated or punched laths let air and light through when the door is closed.

Extra Protection Add wind guides for exposed openings and extra locks for higher-risk sites.

Power Cut Back-up A chain override lets you open the door by hand if the power fails.

Curtain

• Solid 75mm galvanised steel laths (standard)
• Perforated laths – 18% vision
• Punched laths – 24% vision

Motor

• GfA inboard (chain drive) or outboard (direct drive)
• 230V single phase or 415V 3 phase

Controls

• Hold-to-run switch (standard)
• Key switch
• Remote control / fobs (optional)
• Access control integration

Upgrades

• Wind guides for large or exposed openings
• Additional locking
• Safety edges, photocells and emergency stop

Finish

• Galvanised (standard)
• Powder coated in any RAL or BS colour

• Laths: single skin galvanised steel, 75mm high; solid, perforated or punched
• Lath thickness: 0.7mm (22G), 0.9mm (20G) or 1.2mm (18G), depending on size and security
• Weight: approx. 12kg/m²
• Maximum size: approx. 7000mm wide x 7000mm high; larger on request
• Guide rails: galvanised steel U channel on 50mm x 75mm fixing angle; wind guides optional
• Bottom rail: reinforced steel T rail; locks optional
• Motor: GfA inboard (chain drive) or outboard (direct drive); 230V or 415V
• Manual override: chain
• Controls: hold-to-run, key switch, remote, access control
• Safety: manual override, safety brake, obstacle detection, safety edge
• Finish: galvanised; any RAL/BS powder coat
• Security: not rated as standard; up to LPS1175 SR2 on 75mm single skin steel laths (see the LPS1175 Security Level 2 version)
• Warranty: 2-year manufacturer's warranty
• Compliance: CE marked / UKCA compliant (where applicable)

Manufacture: up to 4 weeks. Larger doors and powder coated finishes can add up to 2 weeks.

Supply and fit: up to 4–7 weeks, including site survey, manufacture and installation.

Installation: because of the size and weight, we strongly recommend professional installation, especially with GfA 230V or 415V motors.

Prices from £2,023 for a 1000mm x 1000mm door

The final price depends on:

• Door width and height
• Lath type and thickness
• Motor: inboard or outboard, 230V or 415V
• Controls, wind guides and extra locks
• Finish: galvanised or powder coated
• Installation

Need something more specific? See our LPS1175 SL2 steel doors for tested security, Insulated Industrial Doors for heat retention, Manual Chain Operated shutters where there's no power, or our car park shutters.