Why use the Insurance Approved Retractable Security Grille - LPS1175 Security Level 2?
The CS12 is a High Security Insurance Approved Retractable Security Grille for Windows and Doors. Independently Tested by the LPCB to LPS1175 Security Rating Level 2. This is a Secured By Design product, which is a Police and Insurance preferred specification. The CS12 comes as standard with a Two Point Hook Lock built into the grille and Lock protection plates for added strength and security. The grille is Top Rolling for smooth operation and is available with the "X" Lattice design. Fitted Internally, it can be a Fixed Panel, Single Stack as standard or Double Stack at an extra cost. The grille is available with Lift Up Bottom Tracks for Doorways.
The CS12 Insurance Approved Retractable Security Grille - LPS1175 Security Level 2 comes Powder Coated White as standard. The grilles can be Powder Coated any BS or RAL colour to match your colour scheme at an additional cost.
LPS1175 Security Level 2
2 Point Lock
Max Height - Manual
25 working days
CS12 is manufactured from Aluminium and is available in "X" lattice design
Approximately 15% of the overall width
TWO POINT LOCKING SYSTEM - A high security KEBA euro profile cylinder is located on the inside face of the lock post. A strengthening Attack plate is fitted over the lock for extra security. It is NOT possible to have a Double Sided Lock.
TIMBER - A minimum of Structural grade softwood 65mm x 50mm. If the timber is plaster boarded then the plasterboard must be removed in the fixing plane of the grille and replaced with timber or plywood laminate.
STEEL - A minimum of 3mm thick. If the still is plasterboarded then the plasterboard must be removed in the fixing plane of the grille and replaced with timber or plywood laminate.
CONCRETE/BRICK/BLOCK - Can be fitted direct to Concrete/Blockwork/Blockwork. If the Concrete/Brick/Block is plasterboard or rendered then the plasterboard/render must be removed in the fixing plane of the grille and replaced with timber or plywood laminate.
The CS12 is Powder Coated White RAL9016 as standard. Band A, B and C colours are available at an extra cost.