Menu
Your Cart

Car Park Roller Shutters

Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Car Park Roller Shutters
Why choose the Car Park Roller Shutter?

The Car Park shutters are based on the popular RS75 Traditional Galvanised Steel Roller.   It's one of the most versatile and cost-effective types of roller shutters and goes up to 12m wide.  The 75mm curved steel laths, are available in 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm), depending on the size of the roller shutter and the security level required.   The laths are also available Solid, Perforated (18% Vision) and Punched (24% Vision).   The Vision Laths also allow air flow through the shutters, which is very important for ventilation in underground car parks.

The Car Park Roller Shutters are normally Electrically operated for ease of use.  The Car Park shutters are available with a range of Single and 3 Phase motors, depending on the size of the shutter and the amount of use the shutter will get each day.  Generally, 3 Phase Direct Drive motors are used, as they are a heavy duty motor and can provide up to 40 operations per hour.  We can offer a large range of controls including Access Control Integration, Remote Control, Automatic Sensors, Timers, Safety Devices and Traffic Flow systems.

The Car Park Roller Shutters comes as standard in Galvanised Finish.  The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.  


Key Features
Application Car Parks
Product Rating Medium to High
Material Galvanised Steel
Lath Types Solid, Perforated, Punched
Electric Operation Single and 3 Phase Motors
Max Width 12000mm
Max Height - Electric 7000mm
Box & Guides - Standard Finish Galvanised
Curtain - Standard Finish Galvanised
Lead Times 10-20 working days


    SLATS SPECIFICATION    
 Description
The standard Galvanised Steel Laths are 75mm high, curved single skin laths.  The laths are available in different thicknesses depending on the size of the shutter and the security required - 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm). 






Perforated Laths are available at an additional cost - Provides 18% Vision. 



Punched Laths are available at an additional cost - Provides 32% Vision. 

 

At the Bottom of the Curtain you get the Option of a "T" Rail or "L" Rail.   "T" Rail comes as standard.   You can fit a Rubber Bottom Seal or Safety Edge to the bottom of the "L" and "T" Rail, at an extra cost.

 


The Industrial Steel Roller Shutters are available with a Wicket Door.  This is a door that is built into the Shutter Curtain.   This is a pedestrian door that can be used, instead of opening and closing the shutter.  The Wicket Doors are available in Two Sizes and generally inward opening.  We recommend that the Wicket Doors are Powder Coated.



 
    BOX SPECIFICATION    
 Description
Industrial Doors come with a universal steel side end plates.  The end plates are pre-drilled for different motors and motor configurations.   As standard the shutter does not come with a Shutter Hood or Fascia , this is available at an extra cost if required.
 






Box Sizes
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.

 
    GUIDE RAIL SPECIFICATION    
  
Description
Traditional Guides are supplied with galvanised Steel guide angle.  The angle can be inset or outset if preferred, this must be clearly stated on your order.  The thickness of angle varies as below;


 

There are two types of Guide Rails  -  Standard "U" Channel, is provided as standard and comes is different sizes, depending on the size of the shutter.

      



Wind Lock Lock Guides are available at an extra cost.  Ideal when the shutter is fitted is windy locations or for extra security.


   



 
    OPERATION    
 
THREE PHASE (415V) MOTOR OPTIONS

We mainly use GFA motors as they are well made, very reliable and easy to maintain.   We can use Ellard and Link motors if you the customer prefers.   3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a high RPM to single phase motors.  As standard the motors come with a Chain Override.    We can get a 3 phase motor to suit most requirements, including High Usage, High Speed and Hazardous Environments.  All these motors come with a 2 Year Manufacturer Warranty.



.   


 

As standard, the Car Park Roller Shutters come in Galvanised finish.  




The Shutter can be Powder Coated one of our Stock Colours below.  Depending on the Band A, B or C will depend on the additional cost.

  

From only £800.00

Available Options