Medium Duty Car Park Shutters

Right-sized for Smaller Car Parks A lower-cost option than a high usage shutter where traffic is moderate.

Choice of Motor Single phase suits smaller doors; 3 phase suits larger, heavier doors or more frequent use.

Ventilation and Visibility Perforated and punched laths let air and light into an enclosed car park.

Automatic Access ANPR, induction loops, fobs, keypads and timers let authorised drivers in without getting out.

Galvanised Finish Galvanised steel as standard, or powder coated to match the building.

Power Cut Back-up A chain override lets you operate the shutter by hand if the power fails.

Curtain

• Solid 75mm galvanised steel laths (standard)
• Perforated laths – 18% vision
• Punched laths – approx. 24% vision and airflow
• Secure Visi-Link – about 72% vision and airflow, LPS1175 A1 (SR1) or B3 (SR2), Secured by Design

Motor

• 240V single phase GfA motor
• 415V 3 phase GfA motor
• Inboard (chain drive) or outboard (direct drive)

Access control

• ANPR – recognises authorised number plates
• Induction loops – detect vehicles approaching or leaving
• Remote controls and key fobs
• Keypads – PIN code entry
• GSM access – operate from a mobile phone
• Timers – open or close at set times
• Building access control integration

Standard controls

• Hold-to-run switch
• Key switch

Safety

• Safety edges
• Photocells
• Emergency stop

Guides and bottom rail

• Galvanised steel U channel guides; heavy duty wind guides optional
• T bottom rail as standard; L rail optional

Finish

• Galvanised (standard)
• Powder coated in any RAL or BS colour

• Laths: single skin galvanised steel, 75mm high; solid, perforated or punched
• Lath thickness: 0.7mm (22G), 0.9mm (20G) or 1.2mm (18G), depending on size and security
• Weight: approx. 12kg/m²
• Maximum size: approx. 7000mm wide x 7000mm high; larger on request
• Motor: GfA 240V single phase or 415V 3 phase; inboard (chain drive) or outboard (direct drive)
• Duty: about 10–20 operations per hour
• Manual override: chain override
• Guide rails: galvanised steel U channel on 50mm x 75mm fixing angle
• Bottom rail: T rail as standard, L rail optional; material depends on the shutter specification
• Controls: hold-to-run and key switch as standard; remotes, loops, ANPR, keypads, GSM, timers, access control optional
• Security: LPS1175 A1 (SR1) or B3 (SR2) with the Secure Visi-Link curtain, both Secured by Design; standard curtain not security rated
• Finish: galvanised; any RAL/BS powder coat
• Compliance: CE marked / UKCA compliant (where applicable)

Manufacture: Up to 4 weeks. Larger doors and powder coated finishes can add up to 2 weeks.

Supply and fit: 4–7 weeks, including site survey, manufacture and installation.

Installation: because of the size and weight, we strongly recommend professional installation, especially with 240V or 415V GfA industrial motors. We survey first to confirm sizes, structure and the right motor.

Prices from £2,999 for a 1000mm x 1000mm shutter

The final price depends on:

• Opening width and height
• Curtain: solid, perforated, punched or Secure Visi-Link
• Motor: single phase or 3 phase, inboard or outboard
• Access control: ANPR, loops, keypads, GSM, timers
• Safety devices
• Finish: galvanised or powder coated
• Site work: access, structure and lifting

Medium duty or high usage? If your entrance is busy all day or has sharp peaks, look at our High Usage Car Park Shutters.