Industrial, Warehouses
Medium
Solid, Perforated, Punched
Chain Operation
Single and 3 Phase Motors
7000mm (Depending on Height)
7000mm (Depending on Width)
Galvanised
Galvanised
15-20 working days
The Industrial Roller Shutters are the most popular shutters for industrial and Agricultural applications. It's one of the most versatile and cost effective types of roller shutter and goes up to 7m wide and 7m high. For larger sizes, please contact our Sales Team for a price. The 75mm curved steel laths, are available in 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm), depending on the size of the roller shutter and the security level required. The industrial steel roller shutter is also available with a Wicket Door, for pedestrian access without having to fully open the shutter.
The Industrial Steel Roller Shutter Doors are powered using the GFA Direct Drive motor. We offer a 2 year warranty on the GFA motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. These GFA motors will provide 10 -16 operations per hour. The motors are available Single Phase (240V) or 3 Phase (415V). The 415V motors are generally cheaper, lift bigger doors, operate quicker and provide more operations per hour, compared to single phase. The motor limits are digital and can be adjusted at low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.
If you are looking for a Roller Shutter which is more cost effective and is only going to be used a few times per day, then please look at the Commercial Metal Shutters. If you need to fit the industrial shutter within a recess, then look at the Inboard Industrial Roller Shutter Doors. If you don't have any power on site, then look at the Manual Chain Operated Doors.
The Industrial Steel roller shutters, are ideal for use in industrial warehouses and come in Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain
Single skin 76mm (3'') curved steel slat. Wall thickness 0.7mm,0.9mm,
or 1.2mm, depending on overall shutter opening width. Solid laths are
standard with the option
of Perforated (18% Vision) and Punched (25% Vision) at an additional cost.
Bottom Slat
Galvanised steel ’T’ shaped bottom rail is provided as standard. The option of an “L” is available when face fixing or need to miss a door handle on one side of the opening. Both the “T” rail and “L” Rail are available with a Rubber Bottom Seal and Safety Edge at an additional cost
Shutter Box
Galvanised steel casing & end plates as standard. For external installation or for covering up the roller shutter mechanism, there is the optional fascia and hood at an extra cost. Galvanised finish as standard, powder coating available at an additional cost.
Guide Rails
Galvanised steel “U” channel guides.
The guide size varies dependent on application/size, either 50mm, 65mm
or 100mm. Windlocking guides available for added security or windy
locations. Guide channels are bolted onto angle or box section,
depending on the application. Galvanised finish as standard.
Colours
The standard finish is Galvanised finish. It can be powder coated any BS or RAL colour.
Our video on how to measure a Window or Door opening.
Our video on how to install a Face Fixed Industrial roller shutter door with GFA Direct Drive motor.
Our video guide shows what power requirements are needs for 415V Industrial Doors.
Our video guide shows what power requirements are needs for 240V Industrial Doors.
Speak to one of our specialist advisors for more information about this product.
PRODUCT SELECTOR
