Industrial Doors

High Speed Industrial Roller Shutter Door

From only £2,276

Based on 2000mm x 2000mm

instant quote icon Instant Quote

Key Product Features

Product Rating

High

Lath Types

Insulated

Electric Operation

3 Phase

Max Width

7000mm (Depending on Height)

Max Height

7000mm (Depending on Width)

Box and Guides - Standard Finish

Galvanised

Curtain - Standard Finish

Galvanised

Lead Times

15-20 working days

Why choose the High Speed Industrial Roller Shutter Doors?

Our High Speed Industrial Roller Shutters Doors are ideal when you are trying to reduce heat loss with a high volume of traffic going through the door. The advantage of a High Speed Shutter over a High Speed Curtain, is the shutter can provide a fast acting solution, but can also provide Security 24hrs a day. The 100mm insulated laths provide a higher level of security and provide a Slat insulation value of 0.553W(m2K). These 100mm Insulated Steel Shutters go up to 7m wide and 7m high, with a maximum area of 49m2. Tested to wind class 5. The slats are also available with 200mm x 55mm clear perspex Vision Slats, ideal for Pedestrian and Vehicle traffic.


The High Speed Insulated Steel Industrial Doors are powered using the GFA High Speed Direct Drive motor, which comes with a 2 year warranty on the motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. The standard GFA motors will provide up to 30 movements per hour. The High Speed motors are only available 3 Phase (415V). The motor limits are digital and can be adjusted at low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.

The High Speed Industrial Roller Shutters Doors comes Galvanised Finish as standard. These roller shutters can be Powder Coated any BS or RAL colour to match your colour scheme.

Information

Curtain Slat

The Galvanised Steel Laths are Double skin, Insulated for Heat and Sound Insulation. Punched Window Laths are an additional cost. Galvanised finish as standard, powder coating available at an additional cost.

77mm Slat

  • 4.01 w/M2k
  • Max Width - 6000mm
  • Max Area - 20m2
  • Manual Chain Operated
  • Tube Motor and Industrial Motor options

95mm Slat

  • 3.0 w/M2k
  • Acoustic reduction of 27db
  • Max Width 7000mm
  • Max Area - 49m2
  • Industrial Motor options
  • Vision Slats available

100mm Slat

  • 1.5 w/M2k
  • Max Width 7000mm
  • Max Area 72m2
  • Industrial Motor options
  • Vision Slats available}

Bottom Slat

Extruded double skinned Steel with Rubber Seal

Shutter Box

Galvanised steel casing & end plates as standard. For external installation or for covering up the roller shutter mechanism, there is the optional fascia and hood at an extra cost.

Guide Rails

Insulated Industrial Roller Shutter Guides are supplied with galvanised steel guide angle as standard. The angle can be inset or outset if preferred, this must be clearly stated on your order. The thickness of angle varies as below;

77mm Insulated Laths - 95mm Guide with 75mm x 50mm Galvanised Steel Angle
95mm Insulated Laths
- 80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle
100mm Insulated Laths
- 80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle

Colours

Galvanised finish as standard, powder coating available at an additional cost.

Installation Video

Our video on how to install a Face Fixed Industrial roller shutter door with GFA Direct Drive motor.

Need more information?

Speak to one of our specialist advisors for more information about this product.

Use our intuitive product selector to help you find the right product.

Product Selector