The RA6 Bar Servery Shutter is based on the popular RA4 Compact Aluminium roller shutter. The RA6 uses a slightly thicker and taller extruded aluminum lath, which allows it to span wider openings up to 6m. It uses a compact shutter box and guides, compared to Steel shutters, providing a neat solution. The RA6 Roller Shutter is ideal for larger openings like Bars and Serveries.
The High Security Bar Servery Shutter is available Manual Operation - Spring and Lock. Why not automate the shutter, to make daily operation easier and you can incorporate your shutters into a fully automated system, including Timers, Remote Control Systems and Home Hubs eg; Alexa.
The High Security Bar Servery Shutters comes powder coated as standard in White, Brown, Black or Cream as standard. The shutter can be Powder Coated any BS or RAL colour to match your colour scheme.
Bars and Serveries
Spring & Lock
Single Phase - Tube Motor
6000mm (Depending on Height)
Max Height - Manual
2800mm (Depending on Width)
Max Height - Electric
5000mm (Depending on Width)
Box & Guides - Standard Finish
White, Brown, Black, Cream
Curtain - Standard Finish
White, Brown, Black, Cream
7-10 working days
The standard RA6 Laths is double skinned extruded Aluminium shutter with anti vandal wind locks.
Roll formed Aluminium in two sections; top and bottom boxes. Bottom Box removable for installation and maintenance and is chamfered at 45o. The shutter box is assembled on steel endplates.
Clear opening height (to underside of box)
1595 mm - 205 mm box
2750 mm - 250 mm box
2900 mm - 300 mm box
GUIDE RAIL SPECIFICATION
Extruded Aluminium Guides with an integral box section for reinforcement and to facilitate fixing. High density 7mm pile brush seals for quiet and smooth operation.
Construction: Extruded Aluminium with an integral box section for reinforcement and to facilitate fixing.
Dimensions: UPH 140 60 mm wide x 27 mm deep (205 mm box only)
UPH 240 75 mm wide x 27 mm deep (250 mm or 300 mm box)
UPH 250 90 mm wide x 34 mm deep (250 mm or 300 mm box)
The RA6 is available both manually and electrically operated using a tubular motor inside the barrel. The options priced are shown on your quotation which also shows the method of operation we have included. This list shows possible options which would incur different costs.
Roller Shutters usually installed mainly over doorways or Serveries are raised up and down by lifting and lowering the curtain by hand. The roller shutter has a spring in the barrel which helps lifting the shutter. As standard a central bottom lath lock is provided which has a key in the bottom lath and bolts shoot into the guides rails at each side. The Bottom lath lock can be operated from both sides but has a secure and non-secure side to the lock. Optional bullet locks are available which are pins that go through the guide rails each side.
ELECTRIC - (N.B. minimum shutter width 750mm)
Electric shutters are usually fitted on larger openings where Manual Operation is not suitable or where the operator requires an easy, clean and user friendly type of operation. Single phase tubular motors are enclosed within the barrel giving full protection from the elements. Electric Roller Shutters can be controlled individually or grouped to one controller. The controllers available include internal rocker switch, security key switch or Remote Control. Manual overrides are available on Electric Roller Shutters which allow the shutter to be operated when the power to the shutter has failed.
The RA6 Roller Shutter is available in the following standard colours. Band A, Band and Band C are an additional cost.