The X904 Maximum Security Roller Shutter is an Insurance Approved Level 4 Roller Shutter, ideal for very High Risk applications. The Curtain has a unique Anti Lift mechanism, so it can't be lifted even if it's half open and doesn't require any mechanical locking. Independently Tested by the LPCB to LPS1175 Security Rating Level 4 - Certified for Installation Internal and Externally. This is a Secured By Design product, which is a Police and Insurance preferred specification.
The X904 Maximum Security Roller Shutter can be electrically operated using either a Single Phase Tube Motor for smaller opening and low usage. For larger openings and higher usage, a Single or 3 Phase Direct Drive motor can be fitted. As standard, the X904 comes Electrically operated with Internal switch operation. Full range of compatible controls including push button switch, key switch, radio control or possible to integrate into building management systems and third party alarms.
The X904 Maximum Security Roller Shutter comes powder coated in a standard BS or RAL colour.
Commercial, Retail, MOD
LPS1175 Security Level 4
Single and 3 Phase Motors
Max Height - Electric
Box & Guides - Standard Finish
Standard BS or RAL Colour
Curtain - Standard Finish
Standard BS or RAL Colour
30 working days
The X904 is available with Solid Laths. The curtain has unique profiles built into the curtain, which prevents the shutter from been lifted in any position, including half closed. The Self Locking Technology means that you don't need any manual or electric locking system.
The X904 comes as standard with a Heavy Duty Extruded Aluminum Guide Rail. The standard guide size is 150mm W x 50mm, this may change on larger openings. Powder Coated in a standard BS or RAL Colour.
Steel end plates with two-piece roll formed Aluminium Casing.
Overall Shutter height (including shutter box) - (May change to on larger widths)
2000 mm - 250mm box
3000 mm - 300 mm box
4000 mm - 360 mm box
5000 mm - 360 mm box
6000 mm - 400mm box
The X904 is certified to be installed onto:
- Block work
- Structural Steelwork
- Sub Assembly Steel Framework
The X904 Roller Shutters are Electrically Operated using Single (240V) or 3 Phase (415V) motors. This depends on the Size of the opening, the usage the door will be operated and if the shutter is face or reveal fixed.
TUBE MOTOR - The single phase tube motor is concealed within the Shutter Barrel and is ideal when headroom is limited. Only used on smaller openings and applications where the shutter will be operated a few times per day. Available with a Manual Winding Handle.
INDUSTRIAL MOTOR - They can be fitted Inboard Chain Drive, which is used for Reveal Fixing and is only suitable for Medium use. Where possible we use the Direct Drive motors that are bolted onto the endplates. The Direct Drive motors are Heavier Duty, more reliable and operate quicker. As standard, all Industrial Motors come with a Chain Override and Push Button Station. They come with a 1 Year Manufacturer's Warranty.
THREE PHASE (415V) INDUSTRIAL MOTOR OPTIONS
We mainly use GFA motors as they are German made, very reliable and easy to maintain. 3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a higher speed. As standard, the motors come with a Chain Override and Push button station. We can get a 3 phase motor to suit most requirements, including High Usage and High Speed. All these motors come with a 1 Year Manufacturer Warranty.
The X904 Roller Shutter is available in the following standard colours.