Menu
Your Cart

Bottom Rail - L Section

Bottom Rail - L Section
Bottom Rail - L Section
Bottom L rail suitable for 65mm Standard / Windlock Channels and UPH250 Guides. The cut size given will be taken as including the 60mm cut back on either end to allow for the L rail to run in the guides.  Galvanised as standard. Powder coating available at an extra cost.


What length do I need the slats?

1)    Measure the Overall Width of the existing curtain - INCLUDING the Endlocks

2)    Measure the length of the laths only - EXCLUDING the Endlocks

3)    Please provide us with your sizes and we will check both dimensions before the laths are manufactured.




Bottom Slat

The bottom slat is available as "L" Rail or "T" Rail.  Can be supplied with a rubber seal on a "T" Rail only at an extra cost.  Galvanised finish as standard.



 


End Locks

Nylon Endlocks - Non-Powder Coated - £0.50 ex VAT per Pair

Fitted two per slat, every other slat.  Slats are riveted to hold the end lock in place.  





Nylon Endlocks - Powder Coated - £0.75 ex VAT per Pair
Fitted two per slat, every other slat.  Slats are riveted to hold the end lock in place.  




Pressed Steel Endlocks - £1.05 ex VAT per Pair
Fitted two per slat, every other slat.  Slats are riveted to hold the end lock in place.  




Cast Steel Endlocks - £2.48 ex VAT per Pair
Used on large industrial and fire shutters.   Fitted two per slat, every other slat.  Slats are riveted to hold the end lock in place.  






CURTAIN COLOURS  -  The Steel Shutter Curtain comes as standard in a Galvanised Steel finish as standard.   The shutter curtain can be Powder Coated at an extra cost.





The Steel Laths can be Powder Coated Band A, Band and Band C are an additional cost.


From only £6.80