Why choose the 100mm Insulated Industrial Roller Shutter Doors?
The 100mm Insulated Steel Roller Shutters Doors are ideal when you need Heat or Sound Insulation. The laths are manufactured using Twin Walled steel salts, with foam insulation between the skins. The insulated laths provide a higher level of security and provide a Slat insulation value of 0.553W(m2K). The slats are available Solid or with 200mm x 55mm clear perspex Vision Slats. These 100mm Insulated Steel Shutters go up to 7m wide and 7m high, with a maximum area of 49m2. Tested to wind class 5.
The 100mm Insulated Steel Industrial Doors are powered using the GFA Direct Drive motor, which comes with a 2 year warranty on the motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. The standard GFA motors will provide up to 60 movements per day. The motors are available Single Phase (240V) or 3 Phases (415V). The 415V motors are generally slightly cheaper, lift bigger doors, operate quicker and provide more operations per hour, compared to a single phase. The motor limits are digital and can be adjusted at a low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.
The Insulated Industrial Roller Shutter Doors come Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Single and 3 Phase Motors
Max Height - Electric
Box & Guides - Standard Finish
15 working days
The Galvanised Steel Laths are Double skin, Insulated for Heat and Sound Insulation. Punched Window Laths are an additional cost. Galvanised finish as standard.
100mm High Lath
Heat Transmission - 1.5 W/M2K)
Wind Class 5
Max Width - 12000mm
Max Area - 72m2
Available 3 Phase Operation
Vision Laths available
Industrial Doors come with a universal steel side end plates. The end plates are pre-drilled for different motors and motor configurations. As standard the industrial roller shutters, don't come with a Shutter hood, this is available at an extra cost if required.
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.
GUIDE RAIL SPECIFICATION
Insulated Industrial Roller Shutter Guides are supplied with galvanised steel guide angle as standard. The angle can be inset or outset if preferred, this must be clearly stated on your order. The thickness of angle varies as below;
100mm Insulated Laths - 80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle
100mm Insulated Lath - Guide Detail
INDUSTRIAL MOTOR - Where possible we use the Direct Drive motors that are bolted onto the endplates. The Direct Drive motors are Heavier Duty, more reliable and operate quicker. As standard, all Industrial Motors come with a Chain Override and Push Button Station. The GFA Motors and Control Panels come with a 2 Year Manufacturer's Warranty. We mainly use GFA motors as they are German made, very reliable and easy to maintain. We can use Ellard and Link motors if you the customer prefers. 3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a higher speed. As standard, the motors come with a Chain Override and Push button station. We can get a 3 phase motor to suit most requirements, including High Usage, High Speed and Hazardous Environments.
The standard finish on the Insulated Industrial Steel Roller Shutters is Galvanised.
The Shutter can be Powder Coated one of our Stock Colours below. Depending on the Band A, B or C will depend on the additional cost.