Build your Quote & Buy Online
Commercial, Retail, Serveries
Fire Rated 1- 4 hrs
Single Phase - Tube Motor
5500mm (Depending on Height)
4600mm (Depending on Width)
Galvanised
Galvanised
15 working days
The compact Fire Shutter is ideal for smaller openings such as Kitchen Serveries or Reception Counters. This fire shutter is tested and certified when fixed into Masonry Walls or Structural Steel, please see below in the information section about the full substrate requirements. For Timber Stud walls, please see our other Compact Fire Shutter.
The shutter box is smaller, neat and compact because it uses a single-phase tube motor, located inside the barrel. The single-phase tube motor will operate fire shutters up to 6m wide. As standard it comes with a Dual Pole Surface Mounted Keyswitch & Battery Backup so the shutter can self-close in the event of a power failure.
A manual override is fitted to the shutter, so the shutter can be manually raised by the fire brigade if required. The fire shutter must be wired into a Fire Alarm System or an independent heat detector. If the fire alarm system doesn't provide any Audio or Visual Warning, near to the shutter, the shutter must be fitted with Audio Visual Warning devices.
The compact Fire Shutter is tested and certified to new fire standards BS EN 16034:2014 and is CE Marked to BS EN 13241-1:2003. It's available in 30mins, 60mins, 120mins and 240mins fire ratings to suit all levels of fire protection. Learn more about the purpose of a fire door and why they are required in a building now.
New Government Legislation was introduced on the 1st November 2019. This legislation states that it is mandatory for all fire shutters to be CE marked. Products tested to 2008 certification are now prohibited by law. - CLICK HERE FOR NEW FIRE REGULATIONS for more information. If you require further help on buying a fire shutter, please see our fire shutter buyers guide.
SUBSTRATE REQUIREMENTS
CURTAIN SLAT
A standard the Compact Fire Shutter is supplied with a Single skin 76mm (3'') curved steel slat. Wall thickness 0.7mm,0.9mm, or 1.2mm, depending on fire rating and size of the opening.
SHUTTER BOX
Galvanised steel casing & end plates as standard. Galvanised finish as standard, powder coating available at an additional cost
BOTTOM RAIL
Galvanised steel ’T’ shaped bottom rail is provided as standard.
GUIDE CHANNELS
Galvanised steel “U” channel guides. The guide size varies dependent on application/size, either 65mm, 75mm or 100mm. Galvanised finish as standard.
OPERATION
The Compact Fire Shutters are only available with a Single Phase Tube Motor. The fire shutter can be supplied with a basic switch, to open and close the shutter. For total peace of mind, the fire shutters can be fully automated, for example; Connected to the Fire Alarm and Battery Backup in case of a power failure. Other control options available include; Audio Visual Panel, Staged Descent, Emergency Release Switches, and Manual Override.
This video explains what is required in regards to the Power Supply and Fire Alarm Interface for Compact Fire Shutters.
Our brochure on the Compact Fire Shutter.
Welcome to the comprehensive installation manual for the Compact Fire Shutter, your step-by-step guide to a successful and hassle-free setup.
NBS Specification for the Compact Fire Shutter - Solid Structures.
Speak to one of our specialist advisors for more information about this product.