Car Parks
Medium
Galvanised Steel
Solid, Perforated, Punched
Single and 3 Phase Industrial Motors
12000mm (Depending on Height)
7000mm (Depending on Width)
Galvanised
Galvanised
10-20 working days
The Car Park shutters are based on the popular RS75 Traditional Galvanised Steel Roller. It's one of the most versatile and cost-effective types of roller shutters and goes up to 12m wide. The 75mm curved steel laths, are available in 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm), depending on the size of the roller shutter and the security level required. The laths are also available Solid, Perforated (18% airflow) and Punched (24% airflow). The Vision Laths provide air flow through the shutters, which is very important for ventilation in underground car parks.
The Car Park Roller Shutters are normally Electrically operated for ease of use and convenience. The 240V GFA Industrial motor is ideal for smaller car parks with 2-5 cars and will provide approx 8 movements per hour. For car parks up to 10 cars, we would recommend the standard 415V GFA Industrial motor will provide approx. 20 movements per hour. For larger car parks with more than 10+ cars, we would recommend the GFA 415V High Usage Motor will provide approx. 30 movements per hour. We do have cheaper motors, but they are lighter duty and provide fewer operations per hour. We can offer a large range of controls including Access Control Integration, Remote Control, Automatic Sensors, Timers, Safety Devices and Traffic Flow systems.
The Car Park Roller Shutters comes as standard in Galvanised Finish. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain
Single skin 76mm (3'') curved steel slat. Wall thickness 0.7mm,0.9mm,
or 1.2mm, depending on overall shutter opening width. Solid laths are
standard with the option
of Perforated (18% Vision/Airflow) and Punched (25% Vision/Airflow) at an additional cost.
Bottom Slat
Galvanised steel ’T’ shaped bottom rail is provided as standard. The option of an “L” is available when face fixing or need to miss a door handle on one side of the opening. Both the “T” rail and “L” Rail are available with a Rubber Bottom Seal and Safety Edge at an additional cost
Shutter Box
Galvanised steel casing & end plates as standard. For external installation or for covering up the roller shutter mechanism, there is the optional fascia and hood at an extra cost. Galvanised finish as standard, powder coating available at an additional cost.
Guide Rails
Galvanised steel “U” channel guides.
The guide size varies dependent on application/size, either 50mm, 65mm
or 100mm. Windlocking guides available for added security or windy
locations. Guide channels are bolted onto angle or box section,
depending on the application. Galvanised finish as standard.
Colours
The standard finish is Galvanised finish. It can be powder coated any BS or RAL colour.
Speak to one of our specialist advisors for more information about this product.
PRODUCT SELECTOR
