Your Cart
Manual Insulated Industrial Door
Why choose the Manual Insulated Steel Industrial Door?
The Manual Insulated Steel Roller Shutters Doors are ideal when you need Heat or Sound Insulation. The laths are manufactured using a Twin Walled steel salts, with a foam insulation between the skins. The insulated laths provide a higher level of security and provide an insulation value of 4.01W(m2K). These 77mm Insulated Steel Shutters go up to 5m x 5m, with a maximum area of 25m2.
The Manual Insulated Steel Roller Shutters Doors are ideal when you need Heat or Sound Insulation. The laths are manufactured using a Twin Walled steel salts, with a foam insulation between the skins. The insulated laths provide a higher level of security and provide an insulation value of 4.01W(m2K). These 77mm Insulated Steel Shutters go up to 5m x 5m, with a maximum area of 25m2.
The Manual Chain Drive operation is ideal when power is not available on site. You pull a chain to open and close the shutter door. If you do have power on site, then it may be advisable to look at Electric operation is not much more money. For smaller doors that are are only going to be used a few times per day, then please look at the Insulated Steel Roller shutter with a Tube motor. If you need an Insulated roller shutter door that will cover larger openings, then look at the Insulated Industrial Doors, which can go up to 7m x 7m. If you require a door to provide High Usage or High Speed, then look no further than the High Speed Industrial Roller Shutter Door.
The Insulated Industrial Roller Shutter Doors comes Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
SLATS SPECIFICATION
Description
The Galvanised Steel Laths are Double skin, Insulated for Heat, and Sound Insulation. Punched Window Laths are an additional cost. Galvanised finish as standard.
75mm High Lath
75mm High Lath
- Heat Transmission - 4.01 W/M2K)
- Max Width - 6000mm
- Max Area - 20m2
BOX SPECIFICATION
Industrial Doors come with a universal steel side end plates. The end plates are pre-drilled for different motors and motor configurations. As standard the industrial roller shutters, don't come with a Shutter hood, this is available at an extra cost if required.
Box Sizes
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.
GUIDE RAIL SPECIFICATION
Description
Insulated Industrial Roller Shutter Guides are supplied with galvanised steel guide angle as standard. The angle can be inset or outset if preferred, this must be clearly stated on your order. The thickness of angle varies as below;
77mm Insulated Laths - 95mm x 34mm Guide, fitted to 75mm x 50mm Galvanised Steel Angle
OPERATION
INDUSTRIAL MOTOR - Where possible we use the Direct Drive motors that are bolted onto the endplates. The Direct Drive motors are Heavier Duty, more reliable and operate quicker. As standard, all Industrial Motors come with a Chain Override and Push Button Station. The GFA Motors and Control Panels come with a 2 Year Manufacturer's Warranty. We mainly use GFA motors as they are German made, very reliable and easy to maintain. We can use Ellard and Link motors if you the customer prefers. 3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a higher speed. As standard, the motors come with a Chain Override and Push button station. We can get a 3 phase motor to suit most requirements, including High Usage, High Speed and Hazardous Environments.
The standard finish on the Insulated Industrial Steel Roller Shutters is Galvanised.
The Shutter can be Powder Coated one of our Stock Colours below. Depending on the Band A, B or C will depend on the additional cost.
From only £2,182.00
Based on 2000mm x 2000mm
Would you like an Instant Quote?
Please follow the steps below to build a product to suit your requirements.
Product size Guide
Electric - Industrial Motor
- Min Width - 1000mm
- Max Width - 5000mm
- Max Height - 5000mm
- Min Height - 1000mm
Please Click the "Product size Guide" above to reveal the Minimum and Maximum Sizes.
These sizes will depend on the overall size of the poroduct.
Not sure what you need? Multiple Openings?
Contact our Sales Team and let us do a quote for you Click here
Would you like an Instant Quote?
Please enter your opening sizes and then follow the steps to build a product to suit your requirements.
Product size Guide
Electric - Industrial Motor
- Min Width - 1000mm
- Max Width - 5000mm
- Max Height - 5000mm
- Min Height - 1000mm
Please Click the "Product size Guide" above to reveal the Minimum and Maximum
Sizes.
These sizes will depend on the overall size of the poroduct.
Structural Opening Sizes
Lath Sizes
Not sure what you need? Multiple Openings?
Contact our Sales Team and let us do a quote for youClick here
Instant Quote
Enter your details below
Lath Builder
You can build your laths as required, choose your desired width and step through.. blah blah blah.. more instructions required..
Opening {{index}}
Please select one option from each of the boxes above. When selected the option will
show a
Once you have selected an option from each box, it will allow you to go to the next step.
Once you have selected an option from each box, it will allow you to go to the next step.
{{ $store.state.quote.details.sizeError }}
. Please try another option or another product.
Alternatively call our sales team for help on selecting the right product to suit your sizes and application.
Alternatively call our sales team for help on selecting the right product to suit your sizes and application.
Test
Shutter
{{option.name}}
{{ value.header }}
{{ formatName(value.name) }}
{{ product.name }}
{{ formatPrice(product.price) }}
{{ formatPrice(product.price) }}
Your Quotation
Opening {{key}}
Opening Size
{{opening.width}}mm x {{opening.height}}mm
Product Size
{{opening.calculated.width}}mm x {{opening.calculated.height}}mm
{{$store.state.sections[sectionid].options[subsectionid].name}}
{{formatName($store.state.sections[sectionid].options[subsectionid].options[subsection].name)}}
Extras
{{getExtraName(product, qty)}}
Opening Price
{{opening.base_price}}
Quantity
{{opening.quantity}}
Sub Total
{{$store.state.quote.subtotal}}
Delivery
Please enter the first part of your postcode ie; N1 to get a delivery cost
{{$store.state.quote.delivery}}
VAT @ 20%
{{$store.state.quote.tax}}
Grand Total
{{$store.state.quote.total}}
Quote Excludes:
Installation Charges,
Trade Discounts,
Discounts for Multiple Openings
Please contact our sales team for more information
Would you like a copy of your quote?
Please fill in your details below and a copy of your quote will be emailed to you, for your records.
Data Protection
We promise that your data will be kept
secure.
We DON'T sell your information to 3rd parties.
We WONT spam you with
advertisements.
