Build your Quote & Buy Online
Medium
Solid, Perforated, Punched
Chain Operated
5000mm (Depending on Height)
5000mm (Depending on Width)
Galvanised
Galvanised
15-20 working days
The Industrial Steel Roller Shutter Doors are available Manual Chain Operation, ideal when there is no power available. If you have power available on-site and just want low usage, then it may be more cost effective to have an electric roller shutter. We have a large range of motors if required.
The Manual Chain operated Steel roller shutters, come in Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain
Single skin 76mm (3'') curved steel slat. Wall thickness 0.7mm,0.9mm,
or 1.2mm, depending on overall shutter opening width. Solid laths are
standard with the option
of Perforated (18% Vision) and Punched (25% Vision) at an additional cost.
Bottom Slat
Galvanised steel ’T’ shaped bottom rail is provided as standard. The option of an “L” is available when face fixing or need to miss a door handle on one side of the opening. Both the “T” rail and “L” Rail are available with a Rubber Bottom Seal and Safety Edge at an additional cost
Shutter Box
Galvanised steel casing & end plates as standard. For external installation or for covering up the roller shutter mechanism, there is the optional fascia and hood at an extra cost. Galvanised finish as standard, powder coating available at an additional cost.
Guide Rails
Galvanised steel “U” channel guides.
The guide size varies dependent on application/size, either 50mm, 65mm
or 100mm. Windlocking guides available for added security or windy
locations. Guide channels are bolted onto angle or box section,
depending on the application. Galvanised finish as standard.
Colours
The standard finish is Galvanised finish. It can be powder coated any BS or RAL colour.
Speak to one of our specialist advisors for more information about this product.
