Menu
Your Cart

LPS 1175 SR2 Steel Doors

LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors
LPS 1175 SR2 Steel Doors

Why use the LPS 1175 Issue 7 SR2 Steel Security Doors?

The LPS 1175 Issue 7 SR2 security door is a steel door that is independently attack tested by BRE. This falls in the mid to low level of security rated steel doors available. 

The dorset is attacked with a variety of hand tools fora maximum of 15 minutes, with a maximum working time of 3 minutes.  If entry through the door is not gained then the dorset receives the LPS 1175 Issue 7 SR2 level rating. 

To meet the required certification the door has to be provided within the scope that has been tested. If the specification you require falls out of the scope, we can still provide a door to the same spec but it will not be certified.

Large range of options and colours available. 

Key Features
ApplicationDomestic, Commercial, Retail, Warehouses
Door TypeAvailable as Single, Leaf & Half or Double Dorsets
Security RatedLPS 1175 Issue 7 SR2
Fire Rated1-4 hours subject to hardware and options selected
MaterialGalvanised or Zintec Steel dependent on door size and type
Locking HardwarePersonnel, Fire Exit and Electromechanical Furniture Available
Glazing Options100mm wide x 100mm high to 400mm wide x 400mm high subject to door size and hardware.
Louvred Options305mm wide x 305mm high or 605mm wide x 963mm high subject to door size and hardware.
Lead Times12 - 15 working days

Certified Door Sizes

Structural Opening sizes without over panel -


Structural Opening sizes with over panel - 



Frame Construction

Material:- 1.5mm Galvanised steel

Profile:- Single rebated frame - Fully Welded

Reinforcing:- Reinforcing around the lock, hinges and fixing points 

Leaf Construction

Material:- 1.5mm Galvanised steel external face and internal door face. 

Size:- 45mm thick door leaf with an Anti jemmy strip on the external lock side to protect the lock from attack.

Core:- Reinforcing bars welded horizontally and vertically within the door leaf. Core infills vary.

Locking Options 

Manual Key Driven Hardware

Emergency Fire Escape Hardware

Electromechanical Hardware

Hinges

Stainless steel dog bolt security hinges. The amount of hinges varies on the size of the doors. 

Threshold Detail

Personnel or Fire Exit Doors - Steel Cill



Personnel or Fire Exit Doors - Aluminium Cill

Fire Rating 

Doors can be certified up to 4 hours subject to hardware and options selected

Additional Options

Vision Panels

Louvre Panels

Range of stays and door closer's 

Overpanels available. 

Powder Coated Finishes 
Standard Finish is Satin. Matt, Gloss, Textured and Marine Finishes are available subject to availability.
Other colours available upon request. 
RAL & BS Colours

     

    From only £1,295.00 Based on 800mm x 1900mm
    ESTIMATED LEAD TIMES -15 - 20 WORKING DAYS (EXCLUDING DELIVERY)
    📧
    Would you like us to call you back?