Menu
Your Cart

95mm Insulated Industrial Roller Shutter Doors

95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors
95mm Insulated Industrial Roller Shutter Doors

Why choose the 95mm Insulated Industrial Roller Shutter Doors?

The 95mm Insulated Steel Roller Shutters Doors are ideal when you need Heat or Sound Insulation. The laths are manufactured using a Twin Walled steel salts, with a foam insulation between the skins. The insulated laths provide a higher level of security and provide a Slat insulation value of 1.1W(m2K) and 3.2W(m2k) on the quirks . These 95mm Insulated Steel Shutters go up to 7m wide and 7m high, with a maximum area of 44m2.

The 95mm Insulated Steel Industrial Doors are powered using the GFA Direct Drive motor, which comes with a 2 year warranty on the motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. The standard GFA motors will provide up to 60 movements per day. The motors are available Single Phase (240V) or 3 Phase (415V). The 415V motors are generally slightly cheaper, lift bigger doors, operate quicker and provide more operations per hour, compared to single phase. The motor limits are digital and can be adjusted at low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.

If you are looking for a Roller Shutter which is more cost effective, but less insulation, then the 77mm Insulated Steel Industrial Door could be a better alternative.    If you require an insulated industrial door to cover larger openings or more insulation, then the 100mm insulated roller shutter could be the solution.   If you require a door that provides High Usage or High Speed, then look no further than the High Speed Insulated Door.

The Insulated Industrial Roller Shutter Doors comes Galvanised Finish as standard.   The shutters can be Powder Coated any BS or RAL colour to match your colour scheme. 


Key Features
ApplicationIndustrial, Warehouses
Product RatingHigh
MaterialSteel
Lath TypesInsulated
Electric OperationSingle and 3 Phase Motors
Max Width7000mm
Max Height - Electric7000mm
Box & Guides - Standard FinishGalvanised
Lead Times15 working days


    SLATS SPECIFICATION    
 
Description
The Galvanised Steel Laths are Double skin, Insulated for Heat and Sound Insulation.  Punched Window Laths are an additional cost.   Galvanised finish as standard.


95mm High Lath 
  •  Heat Transmission - 3.9 W/M2K)
  • Acoustic Reduction rating of 27dB
  • Wind Class 3
  •  Max Width - 7000mm
  • Max Area - 49m2
  • Available Single and 3 Phase Operation
  • Vision Laths available
  





 
    BOX SPECIFICATION    
 

Industrial Doors come with a universal steel side end plates.  The end plates are pre-drilled for different motors and motor configurations.   As standard the industrial roller shutters, don't come with a Shutter hood, this is available at an extra cost if required.

 



Box Sizes
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.
 
 
 
    GUIDE RAIL SPECIFICATION    
 
Description
Insulated Industrial Roller Shutter Guides are supplied with galvanised steel guide angle as standard.  The angle can be inset or outset if preferred, this must be clearly stated on your order.  The thickness of angle varies as below;
 
95mm Insulated Laths  -  80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle





 
    OPERATION    
 
INDUSTRIAL MOTOR  -   Where possible we use the Direct Drive motors that are bolted onto the endplates.  The Direct Drive motors are Heavier Duty, more reliable and operate quicker.   As standard, all Industrial Motors come with a Chain Override and Push Button Station.  The GFA Motors and Control Panels come with a 2 Year Manufacturer's Warranty.  We mainly use GFA motors as they are German made, very reliable and easy to maintain.   We can use Ellard and Link motors if you the customer prefers.   3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a higher speed.  As standard, the motors come with a Chain Override and Push button station.    We can get a 3 phase motor to suit most requirements, including High Usage, High Speed and Hazardous Environments.   









The standard finish on the Insulated Industrial Steel Roller Shutters is Galvanised.  




The Shutter can be Powder Coated one of our Stock Colours below.  Depending on the Band A, B or C will depend on the additional cost.
colourchart

LB      

    From only £2,049.00 Based on 2000mm x 2000mm
    📧
    Would you like us to call you back?