High
Insulated
3 Phase
7000mm (Depending on Height)
7000mm (Depending on Width)
Galvanised
Galvanised
15-20 working days
The High Speed Insulated Steel Industrial Doors are powered using the GFA High Speed Direct Drive motor, which comes with a 2 year warranty on the motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. The standard GFA motors will provide up to 30 movements per hour. The High Speed motors are only available 3 Phase (415V). The motor limits are digital and can be adjusted at low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.
The High Speed Industrial Roller Shutters Doors comes Galvanised Finish as standard. These roller shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain Slat
The Galvanised Steel Laths are Double skin, Insulated for Heat and Sound Insulation. Punched Window Laths are an additional cost. Galvanised finish as standard, powder coating available at an additional cost.
77mm Slat
95mm Slat
100mm Slat
Bottom Slat
Extruded double skinned Steel with Rubber Seal
Shutter Box
Galvanised steel casing & end plates as standard. For external
installation or for covering up the roller shutter mechanism, there is
the optional fascia and hood at an extra cost.
Guide Rails
Insulated Industrial Roller Shutter Guides are supplied with
galvanised steel guide angle as standard. The angle can be inset or
outset if preferred, this must be clearly stated on your order. The
thickness of angle varies as below;
77mm Insulated Laths - 95mm Guide with 75mm x 50mm Galvanised Steel Angle
95mm Insulated Laths - 80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle
100mm Insulated Laths - 80mm Guide with Brush Seals with 100mm x 50mm Galvanised Steel Angle
Colours
Galvanised finish as standard, powder coating available at an additional cost.
This video shows the speed of a High Speed Insulated Roller Shutter Door. The height of this door is approx 4.5m.
This video shows the Condor Motion and Presence Sensor, which is used on High Speed Industrial Doors for Free Entry and Exit.
This video shows how the LZRi100 Laser Safety Sensor, works on High Speed Industrial Doors.
Our video on how to install a Face Fixed Industrial roller shutter door with GFA Direct Drive motor.
Speak to one of our specialist advisors for more information about this product.
PRODUCT SELECTOR
