Your Cart
Shop Shutters
Why choose the Metal Shop Roller Shutters?
The RS75 Commercial Metal Roller Shutter is the most popular shutter for Shop fronts. It's one of the most versatile and cost-effective types of roller shutters and goes up to 7m wide. The 75mm curved galvanised steel laths, are available in 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm), depending on the size of the roller shutter and the security level required. The laths are also available Solid, Perforated (18% Vision) and Punched (40% Vision).
The Metal Shop Roller Shutters are available Manually Operated - Spring and Lock, but due to the heavy steel curtain, it is normally Electrically operated. Why not automate the shutter, to make daily operation easier and you can incorporate your shutters into a full automation system, including Timers, Remote Control Systems and Smart Hubs eg; Alexa.
The Metal Shop Shutters comes in Galvanised Finish or Powder Coated White, Brown, Black or Cream as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme at an additional cost.
Looking to Buy the Shop Shutter online?
- You can buy this product online in set sizes. PLEASE SEE BELOW
Alternatively, call our customer service team free on0808 296 6169to help discuss your requirements.
- If you do buy one of these shutters, we will contact you to discuss your requirements further. These shutters are made to measure, so we will ask for the exact opening sizes and do drawings for you to check before anything goes into manufacture. Once the drawings are signed off, delivery will be 10-15 workings days.
- If you would like to work out a quote for your specific sizes, please CLICK HERE to be taken to the quote builder.
Not sure if this is the correct product? Contact our sales team for advice and a quote to meet your own specific requirements.
SLATS SPECIFICATION
Description
The standard Galvanised Steel Laths are 75mm high, curved single skin laths. The laths are available in different thicknesses depending on the size of the shutter and the security required - 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm).
Perforated Laths are available at an additional cost - Provides 18% Vision.
Punched Laths are available at an additional cost - Provides 32% Vision.
At the Bottom of the Curtain you get the Option of a "T" Rail or "L" Rail. "T" Rail comes as standard. You can fit a Rubber Bottom Seal or Safety Edge to the bottom of the "L" and "T" Rail, at an extra cost.
BOX SPECIFICATION
Description
3 mm Galvanised Steel end plates are provided as standard.
Shutter Hoods and Fascias are not provided as standard, but are available at an extra cost. Hoods will be supplied in sleeved sections which will need to be joined on site during the installation. Alternatively hoods can be supplied in one section up to 6 metres long but this will extend production time and delivery costs.
Shutter Hoods and Fascias are not provided as standard, but are available at an extra cost. Hoods will be supplied in sleeved sections which will need to be joined on site during the installation. Alternatively hoods can be supplied in one section up to 6 metres long but this will extend production time and delivery costs.
Box Sizes Internal
Clear opening height (to underside of box).
250 mm - 450 mm
As this varies depending on the width, please contact us for the exact clear opening height for the particular width of shutter you require.
Box Sizes External
Clear opening height (to underside of box)
250 mm - 450 mm
As this varies depending on the width, please contact us for the exact clear opening height for the particular width of shutter you require.
GUIDE RAIL SPECIFICATION
Description
Traditional Guides are supplied with galvanised Steel guide angle. The angle can be inset or outset if preferred, this must be clearly stated on your order. The thickness of angle varies as below;
There are two types of Guide Rails - Standard "U" Channel, is provided as standard and comes is different sizes, depending on the size of the shutter.
Wind Lock Lock Guides are available at an extra cost. Ideal when the shutter is fitted is windy locations or for extra security.
OPERATION
Description
The Traditional Shutter is available both manually and electrically operated using a tubular motor inside the barrel. The options priced are shown on your quotation which also shows the method of operation we have included. This list shows possible options which would incur different costs.
SPRING LOADED
Roller Shutters usually installed mainly over doorways or
Serveries are raised up and down by lifting and lowering the
curtain by hand. The roller shutter has a spring in the barrel
which helps lifting the shutter. As standard a central bottom
lath lock is provided which has a key in the bottom lath and
bolts shoot into the guides rails at each side. The Bottom
lath lock can be operated from both sides but has a secure
and non-secure side to the lock. Optional bullet locks are
available which are pins that go through the guide rails each side.
ELECTRIC - (N.B. minimum shutter width 750mm)
Electric shutters are usually fitted on larger openings where
Manual Operation is not suitable or where the operator
requires an easy, clean and user friendly type of operation.
Single phase tubular motors are enclosed within the barrel
giving full protection from the elements. Electric Roller
Shutters can be controlled individually or grouped to one
controller. The controllers available include internal rocker
switch, security key switch or Remote Control. Manual
overrides are available on Electric Roller Shutters which
allow the shutter to be operated when the power to the
shutter has failed.
The Traditional Commercial Steel Roller Shutters is available Galvanised finish or Powder Coated one of our 4 standard colours.
Band A, Band and Band C are an additional cost.
- Stock: In Stock
From only £401.00
Would you like an Instant Quote?
Please follow the steps below to build a product to suit your requirements.
Product size Guide
Electric - Tube Motor
- Max Width - 7000mm
- Min Height - 500mm
- Max Height - 5000mm
Detailed Size Matrix Download
Please Click the "Product size Guide" above to reveal the Minimum and Maximum Sizes.
These sizes will depend on the overall size of the poroduct.
Not sure what you need? Multiple Openings?
Contact our Sales Team and let us do a quote for you Click here
Would you like an Instant Quote?
Please enter your opening sizes and then follow the steps to build a product to suit your requirements.
Product size Guide
Electric - Tube Motor
- Max Width - 7000mm
- Min Height - 500mm
- Max Height - 5000mm
Detailed Size Matrix Download
Please Click the "Product size Guide" above to reveal the Minimum and Maximum
Sizes.
These sizes will depend on the overall size of the poroduct.
Structural Opening Sizes
Lath Sizes
Not sure what you need? Multiple Openings?
Contact our Sales Team and let us do a quote for youClick here
Instant Quote
Enter your details below
Lath Builder
You can build your laths as required, choose your desired width and step through.. blah blah blah.. more instructions required..
Opening {{index}}
Please select one option from each of the boxes above. When selected the option will
show a
Once you have selected an option from each box, it will allow you to go to the next step.
Once you have selected an option from each box, it will allow you to go to the next step.
{{ $store.state.quote.details.sizeError }}
. Please try another option or another product.
Alternatively call our sales team for help on selecting the right product to suit your sizes and application.
Alternatively call our sales team for help on selecting the right product to suit your sizes and application.
Test
Shutter
{{option.name}}
{{ value.header }}
{{ formatName(value.name) }}
{{ product.name }}
{{ formatPrice(product.price) }}
{{ formatPrice(product.price) }}
Your Quotation
Opening {{key}}
Opening Size
{{opening.width}}mm x {{opening.height}}mm
Product Size
{{opening.calculated.width}}mm x {{opening.calculated.height}}mm
{{$store.state.sections[sectionid].options[subsectionid].name}}
{{formatName($store.state.sections[sectionid].options[subsectionid].options[subsection].name)}}
Extras
{{getExtraName(product, qty)}}
Opening Price
{{opening.base_price}}
Quantity
{{opening.quantity}}
Sub Total
{{$store.state.quote.subtotal}}
Delivery
Please enter the first part of your postcode ie; N1 to get a delivery cost
{{$store.state.quote.delivery}}
VAT @ 20%
{{$store.state.quote.tax}}
Grand Total
{{$store.state.quote.total}}
Quote Excludes:
Installation Charges,
Trade Discounts,
Discounts for Multiple Openings
Please contact our sales team for more information
Download Quote – PDF
Would you like a copy of your quote?
Please fill in your details below and a copy of your quote will be emailed to you, for your records.
Data Protection
We promise that your data will be kept
secure.
We DON'T sell your information to 3rd parties.
We WONT spam you with
advertisements.
Email My Quote
