The RA9 Aluminium Roller Grille is a modern version of the old fashioned Tube & Link style shutter. The RA9 provides the same amount of vision, provides a higher level of security and is a lot more cost effective than the Tube & Link Shutters. The RA9 Aluminium Roller is only suitable for Internal use. The RA9 comes with a standard spacing of 150mm x 70mm. For added security and preventing hand getting through the curtain, there is the option of a closer spacing of 75mm x 70mm.
The Aluminium Roller Grille is available Manual Operation with Spring and Lock. Why not automate the shutter, to make daily operation easier and you can incorporate the your shutters into a fully automation system, including Timers, Remote Control Systems and Home Hubs eg; Alexa.
The RA9 Aluminium Roller Grille curtain comes in Anodised Silver as standard, but can be powder coated at an additional cost. The Box and Guides come as standard in White, Brown, Black or Cream . The shutter can be Powder Coated any BS or RAL colour to match your colour scheme.
Commercial, Retail, Bars and Serveries
Grille - 69% Vision
Spring and Lock
Single Phase - Tube Motor
5000mm (Depending on Height)
Max Height - Manual
2800mm (Depending on Height)
Max Height - Electric
4000mm (Depending on Height)
Box & Guides - Standard Finish
White, Brown, Black, Cream
Curtain - Standard Finish
7-10 working days
Constructed from a combination of extruded Aluminium links and hinge section. Link spacing is 150mm in line as standard, however a brick bond pattern is available at no extra charge. 75mm spacing and Solid slat profile is available at an extra charge.
Roll formed Aluminium in two sections; top and bottom boxes. Bottom Box removable for installation and maintenance and is chamfered at 45o. The shutter box is assembled on steel end plates.
Clear opening height (to underside of box)
1600 mm - 205 mm box
2800 mm - 250 mm box
4000 mm - 300 mm box
GUIDE RAIL SPECIFICATION
Extruded Aluminium Guides with an integral box section for reinforcement and to facilitate fixing. High density 4 or 7mm (dependant on model) pile brush seals for quiet and smooth operation.
UPH140 60 mm wide x 27 mm deep (205 mm box only)
UPH240 75 mm wide x 27 mm deep (250 mm or 300 mm box)
UPH250 90 mm wide x 3 4mm deep (250 mm or 300 mm box)
The RA9 is available both manually and electrically operated using a tubular motor inside the barrel. The options priced are shown on your quotation which also shows the method of operation we have included. This list shows possible options which would incur different costs.
Roller Shutters usually installed mainly over doorways or Serveries are raised up and down by lifting and lowering the curtain by hand. The roller shutter has a spring in the barrel which helps lifting the shutter. As standard a central bottom lath lock is provided which has a key in the bottom lath and bolts shoot into the guides rails at each side. The Bottom lath lock can be operated from both sides but has a secure and non-secure side to the lock. Optional bullet locks are available which are pins that go through the guide rails each side.
ELECTRIC - (N.B. minimum shutter width 750mm)
Electric shutters are usually fitted on larger openings where Manual Operation is not suitable or where the operator requires an easy, clean and user friendly type of operation. Single phase tubular motors are enclosed within the barrel giving full protection from the elements. Electric Roller Shutters can be controlled individually or grouped to one controller. The controllers available include internal rocker switch, security key switch or Remote Control. Manual overrides are available on Electric Roller Shutters which allow the shutter to be operated when the power to the shutter has failed.
The RA9 Roller Grille Shutter Curtain comes as standard in an Anodised Silver finish. The shutter curtain can be Powder Coated at an extra cost.
The RA9 Box and Guides is available in the following standard colours. Band A, Band and Band C are an additional cost.