Low to Medium
Grille - 75% Vision
Single Phase - Tube Motor
5000mm (Depending on Height)
5000mm (Depending on Width)
Galvanised
Mill
20-25 working days
The Tube & Link Shutters are were an old favourite for Bar Shutters, as it provides 75% vision. The shutter curtain is made up of lots of 8mm rods, 13mm Tubes and Links, which makes it labour intensive to manufacture, which increases the cost and lead times. Due to the way the curtain is constructed, the curtain does flex, so its not recommended for external use. The standard curtain configuration is "In Line" with 111mm x 69mm spacing. The curtain is available as a Brick Bond configuration which has 222m x 69mm spacing.
The Tube & Link Bar Servery Shutter is only available electrically operated. It can be operated using a Single Phase Tube Motor with a Toggle or Key Switch. For larger openings, we can use a 3 Phase Direct Drive motor with a push button station.Both tubular & outboard motors have numerous control option variants such as group, remote or mobile phone activation
The Tube & Link bar servery shutter curtain comes Mill finish as standard and the option of Anodised Silver or Powder Coated at en extra cost. The Box and Guides come as standard in Galvanised finish. The shutter can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain
Brick formation as standard, utilising 13mm diameter tubes enclosing 8mm steel rods. Vertical lattice links create 56mm high openings (lower or higher available on request), enabling 75% transparency. Finish: Anodised aluminium, mill finish or powder coated.
Bottom Slat
Galvanised steel ’T’ shaped bottom rail is provided as standard. The option of an “L” is available when face fixing or need to miss a door handle on one side of the opening. Both the “T” rail and “L” Rail are available with a Rubber Bottom Seal and Safety Edge at an additional cost
Shutter Box
Galvanised steel casing & end plates as standard. For external installation or for covering up the roller shutter mechanism, there is the optional fascia and hood at an extra cost. Galvanised finish as standard, powder coating available at an additional cost.
Guide Rails
Galvanised steel “U” channel guides.
The guide size varies dependent on application/size, either 50mm, 65mm
or 100mm. Windlocking guides available for added security or windy
locations. Guide channels are bolted onto angle or box section,
depending on the application. Galvanised finish as standard.
Colours
The standard finish is Galvanised finish. It can be powder coated any BS or RAL colour.
Our video on how to measure a Window or Door opening.
Our video on how to install an Electric roller shutter.
Speak to one of our specialist advisors for more information about this product.
PRODUCT SELECTOR
