Domestic. Commercial, Retail, Bars and Serveries
Yes
LPS1175 Issue 8 B3 (SR2)
Solid and Perforated
Single Phase - Tube Motor
4600mm (Depending on Height)
3600mm (Depending on Width)
White, Silver, Anthracite Grey
White, Anthracite Grey
20 working days
The Vortex + Ultra Compact Security Shutter uses a 25% smaller shutter box housing, compared to any Roller Shutter. The very small box measuring just 165mm up to a height of 2.5m!! Before the Vortex Ultra Compact Shutter, the smallest shutter box on a height of 2.5m was 205mm, with the Vortex saving 40mm headroom. This can make a big difference when headroom is limited. The Vortex + Ultra Compact Security Shutter is available with Solid or Perforated lath profiles, which can mixed to provide security and vision.
Tested up to 6m wide at Wind Class 5, which resists wind speeds up to 114mph. Independently tested by the LPCB to LPS1175 Issue 8 B3 (SR2) - for Installation Internally and LPCB to LPS1175 Issue 8 B1 if fitted Externally. This is a Secured By Design product, which is a Police and Insurance preferred specification. The Ultra Compact Roller Shutter is available as a not security rated product, where security is not the main concern.
The Vortex + Ultra Compact Security Shutter is available Electrically operated, operated using a Single Phase Tube Motors. Available with numerous control option variants such as group, remote or mobile phone activation.
The Vortex Ultra Compact Security Shutter is finished in White and Anthracite Grey as standard. The shutter can be Powder Coated any BS or RAL colour to match your colour scheme.
Curtain Slat
The ultra compact roller shutters use a Single Skin Aluminium Lath, available Solid or Perforated. The subtle differences in lath sizes means it produces a shutter with the tightest nesting available, resulting in the world's smallest shutter box. The 150 mm box size will house a shutter up to 1.7 m tall, whereas the largest compact shutter box is just 205 mm and will house a 3.6 m shutter.
Bottom Slat
Extruded aluminium with rubber bottom seal. Reinforcing handle option (AEGR) or reinforcing handle & rubber option available at at extra cost. This bottom slat features a top quirk which can be removed and turned around in the event that the bottom slat lock needs to face the other way.
Shutter Box
Roll formed Aluminium in two sections; top and bottom boxes. Bottom Box removable for installation and maintenance and is chamfered at 45o. The shutter box is assembled on steel endplates.
Guide Rails
Extruded aluminium with box section for fixing/reinforcement and high security wind locks.
Colours
The standard colours for the Ultra Compact Roller Shutters are White RAL9016 and Anthracite Grey RAL7016.
Our video on how to measure a Window or Door opening.
Our video on how to install an Electric roller shutter.
Speak to one of our specialist advisors for more information about this product.
PRODUCT SELECTOR
