Agricultural Roller Shutter Doors

E130 High Security Roller Shutters - LPS1175 SR3-5

From only £8,500

Based on 2500mm x 2500mm

instant quote icon

Key Product Features

Product Rating

LPS1175 Security Level 3-5

Lath Types

Insulated

Electric Operation

Single and 3 Phase Industrial Motors

Max Width

7000mm (Depending on Height)

Max Height

5600mm (Depending on Width)

Box and Guides - Standard Finish

Galvanised

Curtain - Standard Finish

Galvanised

Lead Times

20-30 working days

Why choose the i100 Insulated Industrial Door?

The i100 Industrial Door has been tested by the Loss Prevention Certification Board LPS1175 (7.0), rated SR3, SR4 and SR5 security levels, and awarded 'Secured by Design' status. Suitable for internal face fix installation only. The 100mm Insulated Steel Roller Shutters Doors are ideal when you need Heat or Sound Insulation. The laths are manufactured using Twin Walled steel salts, with reinforcing materials between the skins. The i100 incorporates a bullet locking system situated approx. 1m from ground level, fixed to each guide rail. Central ground anchor on the bottom lath on shutters over 3 meters wide. These 100mm Insulated Steel Shutters go up to 7m wide and 5600m high, with a maximum area of 49m2. The i100 is also available in Security Level 4.

The i100mm Insulated Steel Industrial Doors are powered using the GFA Direct Drive motor, which comes with a 1 year warranty on the motors and controls. The direct-drive motor bolts onto the outside of the endplate, direct to the axle assembly, which is more reliable than the inboard motors. The standard GFA motors will provide up to 60 movements per day. The motors are available Single Phase (240V) or 3 Phases (415V). The 415V motors are generally slightly cheaper, lift bigger doors, operate quicker and provide more operations per hour, compared to a single phase. The motor limits are digital and can be adjusted at a low level on the control panel. We also have a large of controls and sensors for example Radar Sensors for Fork Lift Traffic, Traffic Lights and Safety devices.
If you are looking for a Roller Shutter which is more cost effective, but less insulation, then the 77mm Insulated Steel Industrial Door could be a better alternative. If you require an Industrial Door to provide high usage or high speed, then look no further than the High Speed Insulated Industrial Door.

The i100 Insulated Industrial Roller Shutter Doors come Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.

Information

Curtain Slat

Double-skinned extruded aluminium slat containing state-of-the-art anti-cut bars. An additional anti-lift profile eliminates the need for additional locking systems.

  • Visible Face :: 115mm + 30mm anti-lift profile
  • Weight per m² :: 32kg
  • Maximum Opening Width :: 10000mm
  • Maximum Opening Height :: 10000mm
  • Maximum Surface :: 90m²


Enclosure / Housing

Not provided as standard. Steel casing available on request.


Guide Channels / Bottom Slat

Extruded aluminium bottom slat with solid aluminium defenders.

Extruded aluminium guide channels with rubber weather seal. Width of 120mm.

Operation

Tubular Motor: With internal rocker switch or external key switch and safety brake as appropriate to comply with legislation. Manual override facility & crank handle as required (surcharge applies).

Outboard Motor: GfA single or three phase motor with integrated safety brake, chain manual override and push button control station as standard.

All motors have numerous control option variants such as remote and group or mobile phone activation.

CE compliant to all applicable directives and standards


Finish

The E130 can be powder coated to an RAL / BS colour reference.

Need more information?

Speak to one of our specialist advisors for more information about this product.

Use our intuitive product selector to help you find the right product.

Product Selector