Other BS or RAL Colours available at an extra cost
Priced per linear meter - Cut to your sizes
What length do I need the slats?
To work out the slat size, you need to:
1) Measure the Overall Width of the Shutter, including the Guide Rails.
2) Identify the Guide Rail, by measuring the width and depth of the guide channel.
Deductions from Overall Shutter WIdth
H25 Guide Rail - DEDUCT - 75mm overall
H30 Guide Rail - DEDUCT - 75mm overall
H40 Guide Rail - DEDUCT - 80mm overall
3) The SLAT CUT SIZE = O/A Shutter Width MINUS the Guide Deduction
Bottom Slat Endlocks with AEG bottom Slat attached. The bottom slat will have a reinforcing angle with protective cover caps fitted as standard. Can be supplied with rubber seal in place of reinforcing angle at no extra cost. Powder-coated White, Brown, Black or Cream.
If the Roller Shutter is Spring and Lock, a Bottom Lath can be factory fitted into the Bottom rail at an extra cost.
Standard - £0.67 ex VAT each
Fitted two per slat, every other slat. Slats are crimped to hold the endlock in place. For on site repairs the endlocks can be riveted in place using 4 x 6 rivets.
Guide Rails H25 Extruded Aluminium Guides with an integral box section for reinforcement and to facilitate fixing. High density 5mm pile brush seals for quiet and smooth operation.
H30 Extruded Aluminium Guide with an integral box section for reinforcement and to facilitate fixing. High density 5mm pile brush seals for quiet and smooth operation.
The H40/S Guide rail is the Heavy Duty Guide which has Wind Locks and is an extra cost.
CURTAIN COLOURS - The RA4 Slat comes powder coated White, Brown, Black or Cream as standard. Other BS and RAL colours are available at an extra cost.