Why use the High Security Industrial Roller Shutter Doors?
The RS7502 High Security Industrial Roller Shutter Door is based on the popular Steel Industrial Door, but has added features for higher risk applications. Ideal for Warehouse Doors, Industrial Units, Loading Bays, Shopping Centres and large openings that require a high level of security. Independently tested by the LPCB to LPS1175 Security Rating Level 2 - Certified for Installation Internal use. This is a Secured By Design product, which is a Police and Insurance preferred specification.
The RS702 High Security Industrial Roller Shutter Door uses an 18G Galvanised Solid Steel Curved Lath, Electrically Operated with Internal Bullet Locking. With a range of Single and 3 Phase Motor options, depending on the sizes and number of operations required. Why not automate the shutter with Remote Control and Motion sensors.
The RS7502 High Security Industrial Roller Shutter Door comes Galvanised finish standard. The shutter can be Powder Coated any BS or RAL colour to match your colour scheme.
As standard, the RS7502 comes with 18G Galvanised Steel Solid Laths with anti vandal wind locks.
Industrial Doors come with a universal steel side end plates. The end plates are pre-drilled for different motors and motor configurations. As standard the shutter does not come with a Shutter Hood, this is available at an extra cost if required. For the Security Rating, the shutter box has to be fitted on the Inside Face of the brickwork and above the Lintel, so it's not visible from the outside.
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.
GUIDE RAIL SPECIFICATION
As standard, the the RS702 comes with 100mm Steel Wind Guides, for added security. For the Security Rating, the guides have to be fitted on the Inside Face of the brickwork and not visible from the outside.
The RS7502 Industrial Doors are only available Electrically Operated, using Single (240V) or 3 Phase (415V) Industrial motors. This depends on the Size of the opening, the usage the door will be operated and if the shutter s face or reveal fixed. For added security, the shutter has a Manual Lock internally.
THREE PHASE (415V) MOTOR OPTIONS
We mainly use GFA motors as they are well made, very reliable and easy to maintain. We can use Ellard and Link motors if you the customer prefers. 3 Phase motors are very Heavy Duty, they allow from 10 to 40 operation per hour and they also operate at a high RPM to single phase motors. As standard the motors come with a Chain Override. We can get a 3 phase motor to suit most requirements, including High Usage, High Speed and Hazardous Environments. All these motors come with a 1 Year Manufacturer Warranty.
The standard finish on the RS7502 Traditional Industrial Steel Roller Shutters is Galvanised.
The Shutter can be Powder Coated one of our Stock Colours below. Depending on the Band A, B or C will depend on the additional cost.