The Tube & Link Roller Shutter Grille is an open grille arranged in a "brick bond" or In-Line" design. Assembled using 76mm aluminium links with 100mm length aluminium tubes that are slid over aluminium rods .
Internal shopfronts, kiosks, bars and serveries and Car Parks.
Benefit of Product
Offers high vision and air flow, compared with Punched Roller Shutters
1) Manual Spring & Lock
10 Kgs per square metre
Standard Finish for the Curtain is Mill ALuminum, Box and Guides Galvanised Steel. Powder coating in a range of RAL or BS colours available at extra cost.
Constructed from a combination of Aluminium links and tubes. Link spacing is 210mm W x 76mm H. Available "In-LIne" or "BrickBond" design.
The shutter box is assembled on steel endplates.
Overall height (top of box)
1300 mm - 254 mm box
2000mm - 305mm box
3000 mm - 355 mm box
4000 mm - 400 mm box
5000mm - 500mm box
Galvanised Steel, polyester powder coated available at extra cost.
GUIDE RAIL SPECIFICATION
Standard guide rails: 38mm x 29mm x 3mm. Larger Openings 100mm x 32mm x 3mm.
Electric shutters require a 50mm x 50mm steel box section both sides and is used to allow for motor unit and safety brake. A 75mm x 50mm box section will be used for shutters over 160kgs in weight (5000mm x 3200mm approx.)
Mill finish aluminium, polyester powder coated available at extra cost.
The Tube and Link Shutter is available both manually and electrically operated using a tubular motor inside the barrel. The options prices are shown on your quotation which also shows the method of operation that we have included. This list shows possible options which would incur different costs.
Roller Shutters usually installed mainly over doorways or Serveries are raised up and
down by lifting and lowering the curtain by hand. The roller shutter has a spring in
the barrel which helps lifting the shutter. As standard a central bottom lath lock is
provided which has a key in the bottom lath and bolts shoot into the guides rails at
each side. The Bottom lath lock can be operated from both sides but has a secure
and non-secure side to the lock. Optional bullet locks are available which are pins
that go through the guide rails each side.
ELECTRIC - mandatory on shutters above 25kg. (N.B. minimum shutter width
Electric shutters are usually fitted on larger openings where Manual Operation is not
suitable or where the operator requires an easy, clean and user friendly type of
operation. Single phase tubular motors are enclosed within the barrel giving full
protection from the elements. Electric Roller Shutters can be controlled individually
or grouped to one controller. The controllers available include internal rocker switch,
security key switch or Remote Control. Manual overrides are available on Electric Roller Shutters
which allow the shutter to be operated when the power to the shutter has failed.
CURTAIN - Our Standard finish is Mill Finish We can powder coat the Curtain any of the colours below at an extra cost.