Why choose the Manul Chain Operated Roller Shutters?
The Manual Chain Operated Steel Roller Shutters are used when there is no power available on site. This is ideal for remote locations or Agricultural applications. It's one of the most versatile and cost effective types of roller shutter and goes up to 5m wide and 5m high. The 75mm curved steel laths are available in 22G (0.7mm) and 20G (0.9mm), depending on the size of the roller shutter and the security level required. The industrial steel roller shutter is also available with a Wicket Door, for pedestrian access without having to fully open the shutter.
The Industrial Steel Roller Shutter Doors are available Manual Chain Operation, ideal when there is no power available. If you have power available on-site and just want low usage, then it may be more cost effective to have an electric roller shutter. We have a large range of motors if required.
The Manual Chain operated Steel roller shutters, come in Galvanised Finish as standard. The shutters can be Powder Coated any BS or RAL colour to match your colour scheme.
Stores, Farm Buildings, Garages
Solid, Perforated, Punched
10-15 working days
The standard Galvanised Steel Laths are 75mm high, curved single skin laths. The laths are available in different thicknesses depending on the size of the shutter and the security required - 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm).
Perforated Laths are available at an additional cost - Provides 18% Vision.
Punched Laths are available at an additional cost - Provides 32% Vision.
At the Bottom of the Curtain you get the Option of a "T" Rail or "L" Rail. "T" Rail comes as standard. You can fit a Rubber Bottom Seal or Safety Edge to the bottom of the "L" and "T" Rail, at an extra cost.
The Industrial Steel Roller Shutters are available with a Wicket Door. This is a door that is built into the Shutter Curtain. This is a pedestrian door that can be used, instead of opening and closing the shutter. The Wicket Doors are available in Two Sizes and generally inward opening. We recommend that the Wicket Doors are Powder Coated.
Industrial Doors come with a universal steel side end plates. The end plates are pre-drilled for different motors and motor configurations. As standard the shutter does not come with a Shutter Hood or Fascia , this is available at an extra cost if required.
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.
GUIDE RAIL SPECIFICATION
Traditional Guides are supplied with galvanised Steel guide angle. The angle can be inset or outset if preferred, this must be clearly stated on your order.
There are two types of Guide Rails - Standard "U" Channel, is provided as standard and comes is different sizes, depending on the size of the shutter.
Wind Lock Lock Guides are available at an extra cost. Ideal when the shutter is fitted is windy locations or for extra security.
MANUAL CHAIN OPERATION
CHAIN OPERATION - This is ideal when there is no power on site ie; agricultural buildings. Chain operation is usually the same price as electric operation.
The standard finish on the Traditional Industrial Steel Roller Shutters is Galvanised.
The Shutter can be Powder Coated one of our Stock Colours below. Depending on the Band A, B or C will depend on the additional cost.