The HD Tube and Link Roller Grille is a distinctive car park roller security grille, The high grade galvanised steel links that are supported by steel rods incorporating a steel tube casing that provide apertures of 300mm x 76mm that can also be specified as stainless steel and are constructed in a "linkage" style that we call "In line" design to form a rolling grille product.
MEDIUM to HIGH Security
Shopping Malls, Car Parks
Benefit of Product
Offers high vision and 80% air flow, compared with Punched Roller Shutters
1) Electric - Single Phase Tube Motor
2) Electric - 3 Phase up to 100% Rated
16 Kgs per square metre
Standard Finish for the Curtain is Mill Aluminum, Box and Guides Galvanised Steel. Powder coating in a range of RAL or BS colours available at extra cost.
Constructed from a combination of Aluminium links and tubes. Link spacing is 300mm W x 76mm H. Available "In-LIne" design.
The shutter box is assembled on steel endplates.
Overall height (top of box)
2000mm - 305mm box
3000 mm - 355 mm box
3500 mm - 375 mm box
4000mm - 400mm box
Galvanised Steel, polyester powder coated available at extra cost.
GUIDE RAIL SPECIFICATION
Standard guide rails 100mm x 32mm x 3mm.
Electric shutters require a 50mm x 50mm steel box section both sides and is used to allow for motor unit and safety brake. A 75mm x 50mm box section will be used for shutters over 160kgs in weight (5000mm x 3200mm approx.)
Mill finish aluminium, polyester powder coated available at extra cost.
The Tube and Link Shutter is available both manually and electrically operated using a tubular motor inside the barrel. The options prices are shown on your quotation which also shows the method of operation that we have included. This list shows possible options which would incur different costs.
ELECTRIC - mandatory on shutters above 25kg. (N.B. minimum shutter width
Electric shutters are usually fitted on larger openings where Manual Operation is not
suitable or where the operator requires an easy, clean and user friendly type of
operation. Single phase tubular motors are enclosed within the barrel giving full
protection from the elements. Electric Roller Shutters can be controlled individually
or grouped to one controller. The controllers available include internal rocker switch,
security key switch or Remote Control. Manual overrides are available on Electric Roller Shutters
which allow the shutter to be operated when the power to the shutter has failed.
CURTAIN - Our Standard finish is Mill Finish We can powder coat the Curtain any of the colours below at an extra cost.