Menu
Your Cart

Industrial Roller Shutter - Inboard Motor

Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Industrial Roller Shutter - Inboard Motor
Why choose the Industrial Roller Shutter with Inboard Motor?

The Galvanised Steel Industrial Roller Shutters are the most popular shutters for industrial and Agricultural applications.   It's one of the most versatile and cost effective types of roller shutter and goes up to 7m wide and 7m high.  The 75mm curved steel laths, are available in 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm), depending on the size of the roller shutter and the security level required.   The industrial steel roller shutter is also available with a Wicket Door, for pedestrian access without having to fully open the shutter.

The Industrial Roller Shutters have an Inboard motor or chain drive motor.  These motors are fitted on the inside of the endplates, sitting within the doors width, and connects to the axle with a chain.  These motors are ideal when there is no side room for a Direct Drive Industrial Door.   The motors have mechanical limits on the motor and is only availbel with Hold to Run operation.  The Ellard Inboard Motors,  come with a 1 year warranty.   The motors are available in Single Phase (240V) and 3 Phase (415V).  The Inboard motors will provide up to 30 movements per day (Up and Down is 2 movements).

If you are looking for a heavier duty motor, which provides more operations, lifts larger doors,provides for control options and operates quicker, then look at the Direct Drive Industrial Doors.   If you are looking for a Roller Shutter which is more cost effective and is only going to be used a few times per day, then please look at the Commercial Metal Shutters.  If you don't have any power on site, then look at the Manual Chain Operated Doors.


The Industrial Steel  roller shutters, are ideal for use in industrial warehouses and come in Galvanised Finish as standard.   The shutters can be Powder Coated any BS or RAL colour to match your colour scheme. 


Key Features
ApplicationWarehouses, Loading Bays, Agriculture
Product RatingMedium
MaterialGalvanised Steel
Lath TypesSolid, Perforated, Punched
Electric OperationSingle and 3 Phase Motors
Max Width6000mm
Max Height - Electric5000mm
Box & Guides - Standard FinishGalvanised
Curtain - Standard FinishGalvanised
Lead Times10-15 working days


    SLATS SPECIFICATION    
 Description
The standard Galvanised Steel Laths are 75mm high, curved single skin laths.  The laths are available in different thicknesses depending on the size of the shutter and the security required - 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm). 


Galvanised Steel Laths curved single skin laths



Perforated Laths are available at an additional cost - Provides 18% Vision. 


Perforated Laths  Slat Version Provides 18% Vision.


Punched Laths are available at an additional cost - Provides 32% Vision. 
Punched Laths  Provides 32% Vision.

 

At the Bottom of the Curtain you get the Option of a "T" Rail or "L" Rail.   "T" Rail comes as standard.   You can fit a Rubber Bottom Seal or Safety Edge to the bottom of the "L" and "T" Rail, at an extra cost.

T Rail L Rail
 


The Industrial Steel Roller Shutters are available with a Wicket Door.  This is a door that is built into the Shutter Curtain.   This is a pedestrian door that can be used, instead of opening and closing the shutter.  The Wicket Doors are available in Two Sizes and generally inward opening.  We recommend that the Wicket Doors are Powder Coated.


Industrial Roller Shutters With Wicket Door

Roller Shutter Wicket Door
 
    BOX SPECIFICATION    
 Description
Industrial Doors come with a universal steel side end plates.  The end plates are pre-drilled for different motors and motor configurations.   As standard the shutter does not come with a Shutter Hood or Fascia , this is available at an extra cost if required.
 

universal steel side end plates for Industrial Roller Doors




Box Sizes
This varies between 350mm - 550mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.

 
    GUIDE RAIL SPECIFICATION    
  
Description
Traditional Guides are supplied with galvanised Steel guide angle.  The angle can be inset or outset if preferred, this must be clearly stated on your order.   

There are two types of Guide Rails  -  Standard "U" Channel, is provided as standard and comes is different sizes, depending on the size of the shutter.

    galvanised Steel guide angle   galvanised Steel guide angle



Wind Lock Lock Guides are available at an extra cost.  Ideal when the shutter is fitted is windy locations or for extra security.


Wind Lock Lock Guides for roller shutters    Wind Lock Lock Guides for roller shutters



 
    OPERATION    
 



The standard finish on the Traditional Industrial Steel Roller Shutters is Galvanised.  




The Shutter can be Powder Coated one of our Stock Colours below.  Depending on the Band A, B or C will depend on the additional cost.
colourchart

LB Technical Drawings Industrial Roller Shutters Motorised Operation Installation Instructions  Roller Shutters Order Form

  • Stock: Made to Order
From only £1,919.00
ESTIMATED LEAD TIMES -10 - 15 WORKING DAYS (EXCLUDING DELIVERY)