Search our site :

Industrial Fire Shutters with Fusible Link

Why choose the Industrial Fire Roller Shutter with Fusible Link?

The Industrial Fire Shutters are designed for larger openings (up to 12m wide) and are tested to stop the spread of fire from 1-4 hours. The industrial fire shutters use Single (240V) or 3 Phase (415V) Inline Industrial Motors, which allows shutters up to 12m wide. The Industrial Fire Shutters are supplied with a Fusible Link, which melts at 67 degrees and will automatically close the shutter. It also comes with a Solenoid Release, which allows the shutter to be connected to the fire alarm. The industrial fire shutters can also be fitted in locations where there is no power, as it can still close on the fusible link in a fire situation. The Industrial Fire Shutters, have the motor bolted onto the front of the shutter, which make the big and bulky, so not ideal for small openings. The shutters have been independently tested and certified by Exova to Fire Standards BS476 and BS EN 1634.

The Industrial Fire Shutters are only available electrically operated. Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard. All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.

The Industrial Fire Shutters come as standard in Galvanised finish. They can be Powder Coated any BS or RAL colour to match your colour scheme.

Key Features
Application	Commercial, Industrial, Retail
Product Rating	Fire Rated -1-4hrs
Material	Steel
Lath Types	Solid
Electric Operation	Single and 3 Phase Industrial Motors
Max Width	12000mm (Depending on Height)
Max Height - Electric	6000mm (Depending on Height)
Box & Guides - Standard Finish	Galvanised
Curtain - Standard Finish	Galvanised
Lead Times	20 working days

SLATS SPECIFICATION

Description

The standard Galvanised Steel Laths are 75mm high, curved single skin laths. The laths are available in different thicknesses depending on the size of the shutter and the fire rating required - 22G (0.7mm), 20G (0.9mm) and 18G (1.2mm).

BOX SPECIFICATION

Description

Industrial Fire Shutters come with a steel side end plates. The end plates are pre-drilled for different motors and motor configurations. As standard, the industrial fire shutter comes with a Shutter Hood or Fascia. Larger shutters may require a barrel support frame.

Box Sizes

This varies between 305mm - 400mm, dependent on the width of the opening, please contact us for the exact clear opening height for the particular width of shutter you require.

GUIDE RAIL SPECIFICATION

Description

Industrial Fire Shutter Guides are supplied with galvanised Steel guide angle. The angle can be inset or outset if preferred, this must be clearly stated on your order. The thickness of angle varies as below;

Standard "U" Channel, is provided as standard and comes in different sizes, depending on the size of the shutter.

OPERATION

Electric, Inline Industrial Motors: Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard. All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal.

CE compliant to all applicable directives and regulations.

The Industrial Fire Shutters comes Galvanised finish as standard.

The Shutter can be Powder Coated one of our Stock Colours below. Depending on the Band A, B or C will depend on the additional cost.

From only £1,000.00

Add to Cart

Product Enquiry

Opening {{key}} x {{opening.quantity}}	{{opening.calculated.width}}mm x {{opening.calculated.height}}mm	{{opening.total}}
{{$store.state.sections[sectionid].name}}	{{$store.state.sections[sectionid].options[subsectionid].name}}	{{formatName($store.state.sections[sectionid].options[subsectionid].options[subsection].name)}}
Extras